How to change File Permission ? chmod
chmod is used to change the permissions of files or directories.
On Linux and other Unix-like operating systems, there is a set of rules for each file which defines who can access that file, and how they can access it. These rules are called file permissions or file modes. The command name chmod stands for "change mode", and it is used to define the way a file can be accessed.
Before continuing, you should read the section What Are File Permissions, And How Do They Work? in our documentation of the umask command. It contains a comprehensive description of how to define and express file permissions.
In general, chmod commands take the form:
permissions defines the permissions for the owner of the file (the "user"), members of the group who owns the file (the "group"), and anyone else ("others"). There are two ways to represent these permissions: with symbols (alphanumeric characters), or with octal numbers (the digits 0 through 7).
Let's say you are the owner of a file named myfile, and you want to set its permissions so that:
Here is the equivalent command using octal permissions notation:
chmod syntax
Technical Description:
chmod changes the file mode of each specified FILE according to MODE, which can be either a symbolic representation of changes to make, or an octal number representing the bit pattern for the new mode bits.
The format of a symbolic mode is:
[ugoa...][[+-=][perms...]...]
where perms is either zero or more letters from the set r, w, x, X, s and t, or a single letter from the set u, g, and o. Multiple symbolic modes can be given, separated by commas.
A combination of the letters u, g, o, and a controls which users' access to the file will be changed: the user who owns it (u), other users in the file's group (g), other users not in the file's group (o), or all users (a). If none of these are given, the effect is as if a were given, but bits that are set in the umask are not affected.
The operator + causes the selected file mode bits to be added to the existing file mode bits of each file; - causes them to be removed; and = causes them to be added and causes unmentioned bits to be removed except that a directory's unmentioned set user and group ID bits are not affected.
The letters r, w, x, X, s and t select file mode bits for the affected users: read (r), write (w), execute (x), execute only if the file is a directory or already has execute permission for some user (X), set user or group ID on execution (s), restricted deletion flag or sticky bit (t). For directories, the execute options X and X define permission to view the directory's contents.
Instead of one or more of these letters, you can specify exactly one of the letters u, g, or o: the permissions granted to the user who owns the file (u), the permissions granted to other users who are members of the file's group (g), and the permissions granted to users that are in neither of the two preceding categories (o).
A numeric mode is from one to four octal digits (0-7), derived by adding up the bits with values 4, 2, and 1. Omitted digits are assumed to be leading zeros. The first digit selects the set user ID (4) and set group ID (2) and restricted deletion or sticky (1) attributes. The second digit selects permissions for the user who owns the read (4), write (2), and execute (1); the third selects permissions for other users in the file's group, with the same values; and the fourth for other users not in the file's group, with the same values.
chmod never changes the permissions of symbolic links; the chmod system call cannot change their permissions. However, this is not a problem since the permissions of symbolic links are never used. However, for each symbolic link listed on the command line, chmod changes the permissions of the pointed-to file. In contrast, chmod ignores symbolic links encountered during recursive directory traversals.
Setuid And Setgid Bits
chmod clears the set-group-ID bit of a regular file if the file's group ID does not match the user's effective group ID or one of the user's supplementary group IDs, unless the user has appropriate privileges. Additional restrictions may cause the set-user-ID and set-group-ID bits of MODE or RFILE to be ignored. This behavior depends on the policy and functionality of the underlying chmod system call. When in doubt, check the underlying system behavior.
chmod preserves a directory's set-user-ID and set-group-ID bits unless you explicitly specify otherwise. You can set or clear the bits with symbolic modes like u+s and g-s, and you can set (but not clear) the bits with a numeric mode.
Restricted Deletion Flag (or "Sticky Bit")
The restricted deletion flag or sticky bit is a single bit, whose interpretation depends on the file type. For directories, it prevents unprivileged users from removing or renaming a file in the directory unless they own the file or the directory; this is called the restricted deletion flag for the directory, and is commonly found on world-writable directories like /tmp. For regular files on some older systems, the bit saves the program's text image on the swap device so it will load more quickly when run; this is called the sticky bit.
chmod examples
chmod 644 file.html
Set the permissions of file.htm to "owner can read and write; group can read only; others can read only".
chmod u=rw example.jpg
Change the permissions for the owner of example.jpg so that the owner may read and write the file. Do not change the permissions for the group, or for others.
chmod u+s comphope.txt
Set the "Set-User-ID" bit of comphope.txt, so that anyone who attempts to access that file does so as if they are the owner of the file.
chmod u-s comphope.txt
The opposite of the above command; un-sets the SUID bit.
chmod 755 file.cgi
Set the permissions of file.cgi to "read, write, and execute by owner" and "read and execute by the group and everyone else".
chmod 666 file.txt
Set the permission of file.txt to "read and write by everyone.".
chmod a=rw file.txt
Accomplishes the same thing as the above command, using symbolic notation.
Viewing Permissions in The File Listing
A quick and easy way to list a file's permissions are with the long listing (-l) option of the ls command. For example, to view the permissions of file.txt, you could use the command:
ls -l file.txt
...which will display output that looks like the following:
-rwxrw-r-- 1 hope hopestaff 123 Feb 03 15:36 file.txt
Here's what each part of this information means:
On Linux and other Unix-like operating systems, there is a set of rules for each file which defines who can access that file, and how they can access it. These rules are called file permissions or file modes. The command name chmod stands for "change mode", and it is used to define the way a file can be accessed.
Before continuing, you should read the section What Are File Permissions, And How Do They Work? in our documentation of the umask command. It contains a comprehensive description of how to define and express file permissions.
In general, chmod commands take the form:
chmod options permissions file name
If
no options are specified, chmod modifies the permissions of the file
specified by file name to the permissions specified by permissions.permissions defines the permissions for the owner of the file (the "user"), members of the group who owns the file (the "group"), and anyone else ("others"). There are two ways to represent these permissions: with symbols (alphanumeric characters), or with octal numbers (the digits 0 through 7).
Let's say you are the owner of a file named myfile, and you want to set its permissions so that:
- the user can read, write, ande xecute it;
- members of your group can read ande xecute it; and
- others may only read it.
chmod u=rwx,g=rx,o=r myfile
This
example uses symbolic permissions notation. The letters u, g, and o
stand for "user", "group", and "other". The equals sign ("=") means "set
the permissions exactly like this," and the letters "r", "w", and "x"
stand for "read", "write", and "execute", respectively. The commas
separate the different classes of permissions, and there are no spaces
in between them.Here is the equivalent command using octal permissions notation:
chmod 754 myfile
Here
the digits 7, 5, and 4 each individually represent the permissions for
the user, group, and others, in that order. Each digit is a combination
of the numbers 4, 2, 1, and 0:- 4 stands for "read",
- 2 stands for "write",
- 1 stands for "execute", and
- 0 stands for "no permission."
chmod syntax
chmod [OPTION]... MODE[,MODE]... FILE... chmod [OPTION]... OCTAL-MODE FILE... chmod [OPTION]... --reference=RFILE FILE...
Options
-c, --changes
|
Like --verbose, but gives verbose output only
when a change is actually made.
|
-f, --silent, --quiet
|
Quiet
mode; suppress most error messages.
|
-v, --verbose
|
Verbose mode; output
a diagnostic message for every file processed.
|
--no-preserve-root
|
Do
not treat '/'
(the root directory) in any special way, which is the default
setting.
|
--preserve-root
|
Do not
operate recursively on '/'.
|
--reference=RFILE
|
Set
permissions to match those of file RFILE, ignoring any
specified MODE.
|
-R, --recursive
|
Change files
and directories recursively.
|
--help
|
Display
a help message and exit.
|
--version
|
Output version information
and exit.
|
Technical Description:
chmod changes the file mode of each specified FILE according to MODE, which can be either a symbolic representation of changes to make, or an octal number representing the bit pattern for the new mode bits.
The format of a symbolic mode is:
[ugoa...][[+-=][perms...]...]
where perms is either zero or more letters from the set r, w, x, X, s and t, or a single letter from the set u, g, and o. Multiple symbolic modes can be given, separated by commas.
A combination of the letters u, g, o, and a controls which users' access to the file will be changed: the user who owns it (u), other users in the file's group (g), other users not in the file's group (o), or all users (a). If none of these are given, the effect is as if a were given, but bits that are set in the umask are not affected.
The operator + causes the selected file mode bits to be added to the existing file mode bits of each file; - causes them to be removed; and = causes them to be added and causes unmentioned bits to be removed except that a directory's unmentioned set user and group ID bits are not affected.
The letters r, w, x, X, s and t select file mode bits for the affected users: read (r), write (w), execute (x), execute only if the file is a directory or already has execute permission for some user (X), set user or group ID on execution (s), restricted deletion flag or sticky bit (t). For directories, the execute options X and X define permission to view the directory's contents.
Instead of one or more of these letters, you can specify exactly one of the letters u, g, or o: the permissions granted to the user who owns the file (u), the permissions granted to other users who are members of the file's group (g), and the permissions granted to users that are in neither of the two preceding categories (o).
A numeric mode is from one to four octal digits (0-7), derived by adding up the bits with values 4, 2, and 1. Omitted digits are assumed to be leading zeros. The first digit selects the set user ID (4) and set group ID (2) and restricted deletion or sticky (1) attributes. The second digit selects permissions for the user who owns the read (4), write (2), and execute (1); the third selects permissions for other users in the file's group, with the same values; and the fourth for other users not in the file's group, with the same values.
chmod never changes the permissions of symbolic links; the chmod system call cannot change their permissions. However, this is not a problem since the permissions of symbolic links are never used. However, for each symbolic link listed on the command line, chmod changes the permissions of the pointed-to file. In contrast, chmod ignores symbolic links encountered during recursive directory traversals.
Setuid And Setgid Bits
chmod clears the set-group-ID bit of a regular file if the file's group ID does not match the user's effective group ID or one of the user's supplementary group IDs, unless the user has appropriate privileges. Additional restrictions may cause the set-user-ID and set-group-ID bits of MODE or RFILE to be ignored. This behavior depends on the policy and functionality of the underlying chmod system call. When in doubt, check the underlying system behavior.
chmod preserves a directory's set-user-ID and set-group-ID bits unless you explicitly specify otherwise. You can set or clear the bits with symbolic modes like u+s and g-s, and you can set (but not clear) the bits with a numeric mode.
Restricted Deletion Flag (or "Sticky Bit")
The restricted deletion flag or sticky bit is a single bit, whose interpretation depends on the file type. For directories, it prevents unprivileged users from removing or renaming a file in the directory unless they own the file or the directory; this is called the restricted deletion flag for the directory, and is commonly found on world-writable directories like /tmp. For regular files on some older systems, the bit saves the program's text image on the swap device so it will load more quickly when run; this is called the sticky bit.
chmod examples
chmod 644 file.html
Set the permissions of file.htm to "owner can read and write; group can read only; others can read only".
chmod u=rw example.jpg
Change the permissions for the owner of example.jpg so that the owner may read and write the file. Do not change the permissions for the group, or for others.
chmod u+s comphope.txt
Set the "Set-User-ID" bit of comphope.txt, so that anyone who attempts to access that file does so as if they are the owner of the file.
chmod u-s comphope.txt
The opposite of the above command; un-sets the SUID bit.
chmod 755 file.cgi
Set the permissions of file.cgi to "read, write, and execute by owner" and "read and execute by the group and everyone else".
chmod 666 file.txt
Set the permission of file.txt to "read and write by everyone.".
chmod a=rw file.txt
Accomplishes the same thing as the above command, using symbolic notation.
Viewing Permissions in The File Listing
A quick and easy way to list a file's permissions are with the long listing (-l) option of the ls command. For example, to view the permissions of file.txt, you could use the command:
ls -l file.txt
...which will display output that looks like the following:
-rwxrw-r-- 1 hope hopestaff 123 Feb 03 15:36 file.txt
Here's what each part of this information means:
-
|
The first character represents the file type: "-" for a
regular file, "d" for a directory, "l" for a symbolic
link.
|
rwx
|
The next three
characters represent the permissions for the file's owner: in this case, the
owner may read from, write to, ore xecute the file.
|
rw-
|
The next three
characters represent the permissions for members of the file group. In this
case, any member of the file's owning group may read from or write to the
file. The final dash is a placeholder; group members do not have permission
to execute this file.
|
r--
|
The permissions for
"others" (everyone else). Others may only read this file.
|
1
|
The number of hard
links to this file.
|
hope
|
The file's owner.
|
hopestaff
|
The group to whom
the file belongs.
|
123
|
The size of the file
in blocks.
|
Feb 03 15:36
|
The file's mtime
(date and time when the file was last modified).
|
file.txt
|
The name of the
file.
|
Comments
Post a Comment