Drop Down MenusCSS Drop Down MenuPure CSS Dropdown Menu

Xorg

- 
Xorg -version (return code: 0)


X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.4.0-45-generic x86_64 Ubuntu
Current Operating System: Linux ubuntu-xenial 4.4.0-64-generic #85-Ubuntu SMP Mon Feb 20 11:50:30 UTC 2017 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-64-generic root=UUID=7664720c-3742-49b9-b4d5-196d2a148900 ro console=tty1 console=ttyS0
Build Date: 02 November 2016  10:06:10PM
xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support) 
Current version of pixman: 0.33.6
 Before reporting problems, check http://wiki.x.org
 to make sure that you have the latest version.
Xorg -help (return code: 0)

use: X [:<display>] [option]
-a #                   default pointer acceleration (factor)
-ac                    disable access control restrictions
-audit int             set audit trail level
-auth file             select authorization file
-br                    create root window with black background
+bs                    enable any backing store support
-bs                    disable any backing store support
-c                     turns off key-click
c #                    key-click volume (0-100)
-cc int                default color visual class
-nocursor              disable the cursor
-core                  generate core dump on fatal error
-displayfd fd          file descriptor to write display number to when ready to connect
-dpi int               screen resolution in dots per inch
-dpms                  disables VESA DPMS monitor control
-deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
-f #                   bell base (0-100)
-fc string             cursor font
-fn string             default font name
-fp string             default font path
-help                  prints message with these options
+iglx                  Allow creating indirect GLX contexts
-iglx                  Prohibit creating indirect GLX contexts (default)
-I                     ignore all remaining arguments
-ld int                limit data space to N Kb
-lf int                limit number of open files to N
-ls int                limit stack space to N Kb
-nolock                disable the locking mechanism
-maxclients n          set maximum number of clients (power of two)
-nolisten string       don't listen on protocol
-listen string         listen on protocol
-noreset               don't reset after last client exists
-background [none]     create root window with no background
-reset                 reset after last client exists
-p #                   screen-saver pattern duration (minutes)
-pn                    accept failure to listen on all ports
-nopn                  reject failure to listen on all ports
-r                     turns off auto-repeat
r                      turns on auto-repeat 
-render [default|mono|gray|color] set render color alloc policy
-retro                 start with classic stipple and cursor
-s #                   screen-saver timeout (minutes)
-seat string           seat to run on
-t #                   default pointer threshold (pixels/t)
-terminate             terminate at server reset
-to #                  connection time out
-tst                   disable testing extensions
ttyxx                  server started from init on /dev/ttyxx
v                      video blanking for screen-saver
-v                     screen-saver without video blanking
-wm                    WhenMapped default backing-store
-wr                    create root window with white background
-maxbigreqsize         set maximal bigrequest size 
+xinerama              Enable XINERAMA extension
-xinerama              Disable XINERAMA extension
-dumbSched             Disable smart scheduling, enable old behavior
-schedInterval int     Set scheduler interval in msec
-sigstop               Enable SIGSTOP based startup
+extension name        Enable extension
-extension name        Disable extension
-query host-name       contact named host for XDMCP
-broadcast             broadcast for XDMCP
-multicast [addr [hops]] IPv6 multicast for XDMCP
-indirect host-name    contact named host for indirect XDMCP
-port port-num         UDP port number to send messages to
-from local-address    specify the local address to connect from
-once                  Terminate server after one session
-class display-class   specify display class to send in manage
-cookie xdm-auth-bits  specify the magic cookie for XDMCP
-displayID display-id  manufacturer display ID for request
[+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
                       enable/disable accessx key sequences
-ardelay               set XKB autorepeat delay
-arinterval            set XKB autorepeat interval


Device Dependent Usage
-modulepath paths      specify the module search path
-logfile file          specify a log file name
-configure             probe for devices and write an xorg.conf
-showopts              print available options for all installed drivers
-config file           specify a configuration file, relative to the
                       xorg.conf search path, only root can use absolute
-configdir dir         specify a configuration directory, relative to the
                       xorg.conf.d search path, only root can use absolute
-verbose [n]           verbose startup messages
-logverbose [n]        verbose log messages
-quiet                 minimal startup messages
-pixmap24              use 24bpp pixmaps for depth 24
-pixmap32              use 32bpp pixmaps for depth 24
-fbbpp n               set bpp for the framebuffer. Default: 8
-depth n               set colour depth. Default: 8
-gamma f               set gamma value (0.1 < f < 10.0) Default: 1.0
-rgamma f              set gamma value for red phase
-ggamma f              set gamma value for green phase
-bgamma f              set gamma value for blue phase
-weight nnn            set RGB weighting at 16 bpp.  Default: 565
-layout name           specify the ServerLayout section name
-screen name           specify the Screen section name
-keyboard name         specify the core keyboard InputDevice name
-pointer name          specify the core pointer InputDevice name
-nosilk                disable Silken Mouse
-flipPixels            swap default black/white Pixel values
-disableVidMode        disable mode adjustments with xvidtune
-allowNonLocalXvidtune allow xvidtune to be run as a non-local client
-allowMouseOpenFail    start server even if the mouse can't be initialized
-ignoreABI             make module ABI mismatches non-fatal
-isolateDevice bus_id  restrict device resets to bus_id (PCI only)
-version               show the server version
-showDefaultModulePath show the server default module path
-showDefaultLibPath    show the server default library path
-novtswitch            don't automatically switch VT at reset & exit
-sharevts              share VTs with another X server
vtXX                   use the specified VT number
-keeptty               don't detach controlling tty (for debugging only)

Comments

Post a Comment

Popular posts from this blog

How to find the server is whether standby (slave) or primary(master) in Postgresql replication ?

-
Method 1 You can check the mode of the server using "pg_controldata". [pgsql@test~]$ pg_controldata /usr/local/pgsql/data84/ Database cluster state: in archive recovery --> This is Standby Database Database cluster state: in production --> This is Production Database [Master] Method 2 You can use pg_is_in_recovery() which returns True if recovery is still in progress(so the server is running in standby mode or slave) postgres=# select pg_is_in_recovery(); pg_is_in_recovery ------------------- t (1 row) If Return    false   so the server is running in primary mode or master postgres=# select pg_is_in_recovery(); pg_is_in_recovery ------------------- f (1 row)
Read more

PostgreSQL pgBadger

-
pgBadger is a PostgreSQL log analyzer built for speed with fully reports from your PostgreSQL log file. It's a single and small Perl script that outperforms any other PostgreSQL log analyzer. It is written in pure Perl and uses a JavaScript library (flotr2) to draw graphs so that you don't need to install any additional Perl modules or other packages. Furthermore, this library gives us more features such as zooming. pgBadger also uses the Bootstrap JavaScript library and the FontAwesome webfont for better design. Everything is embedded. pgBadger is able to autodetect your log file format (syslog, stderr or csvlog). It is designed to parse huge log files as well as gzip compressed files. See a complete list of features below. Supported compressed format are gzip, bzip2 and xz. For the xz format you must have an xz version upper than 5.05 that supports the --robot option. All charts are zoomable and can be saved as PNG images. You can also limit pgBadger to only report err
Read more

How to Return a Result Set from a PostgreSQL Stored Procedure

-
Image
Both stored procedures and user-defined functions are created with CREATE FUNCTION statement in PostgreSQL. To return one or more result sets (cursors in terms of PostgreSQL), you have to use  refcursor  return type. Quick Example : -- Procedure that returns a single result set (cursor) CREATE OR REPLACE FUNCTION show_cities ( ) RETURNS refcursor AS $$ DECLARE ref refcursor; -- Declare a cursor variable BEGIN OPEN ref FOR SELECT city , state FROM cities; -- Open a cursor RETURN ref; -- Return the cursor to the caller END ; $$ LANGUAGE plpgsql; Overview : Return Multiple Result Sets Cursor Lifetime Until the  end  of transaction Auto-commit Must be  off Transaction must be active so the caller can see a result set Important Note : The cursor remains open until the end of transaction, and since PostgreSQL works
Read more

How to Get Table Size, Database Size, Indexes Size, schema Size, Tablespace Size, column Size in PostgreSQL Database

-
In this post, I am sharing few important function for finding the size of database, table and index in PostgreSQL. Finding object size in postgresql database is very important and common. Is it very useful to know the exact size occupied by the object at the tablespace. The object size in the following scripts is in GB. The scripts have been formatted to work very easily with PUTTY SQL Editor. 1. Checking table size excluding table dependency: SELECT pg_size_pretty(pg_relation_size('mhrordhu_shk.mut_kharedi_audit')); pg_size_pretty ---------------- 238 MB (1 row) 2. Checking table size including table dependency: SELECT pg_size_pretty(pg_total_relation_size('mhrordhu_shk.mut_kharedi_audit')); pg_size_pretty ---------------- 268 MB (1 row) 3. Finding individual postgresql database size SELECT pg_size_pretty(pg_database_size('db_name')); 4. Finding individual table size for postgresql database -including dependency index: SELECT pg_size_pretty(pg_total_rel
Read more

vacuumlo - removing large objects orphans from a database PostgreSQL

-
vacuumlo   is a simple utility program that will remove any   “ orphaned ”   large objects from a   PostgreSQL   database. An orphaned large object (LO) is considered to be any LO whose OID does not appear in any   oid   or   lo   data column of the database. OIDs basically give you a built-in, globally unique id for every row,default is on( default_with_oids ( boolean )). If you use this, you may also be interested in the   lo_manage   trigger in the   lo   module.   lo_manage   is useful to try to avoid creating orphaned LOs in the first place. More about lo module  there are two ways to store large objects in the PostgreSQL:   bytea oid and lo  Working process of vacuumlo: First, vacuumlo builds a temporary table which contains all of the OIDs of the large objects in the selected database. It then scans through all columns in the database that are of type oid or lo, and removes matching entries from the temporary table. (Note: only types with these names are con
Read more