Drop Down MenusCSS Drop Down MenuPure CSS Dropdown Menu

How to configure in silent mode using response file (grid_config.rsp) in oracle rac

cd /u01/app/12.2.0.1/grid
./gridSetup.sh -responseFile /tmp/grid_config.rsp
###############################################################################
## Copyright(c) Oracle Corporation 1998,2017. All rights reserved.           ##
##                                                                           ##
## Specify values for the variables listed below to customize                ##
## your installation.                                                        ##
##                                                                           ##
## Each variable is associated with a comment. The comment                   ##
## can help to populate the variables with the appropriate                   ##
## values.                                                                   ##
##                                                                           ##
## IMPORTANT NOTE: This file contains plain text passwords and               ##
## should be secured to have read permission only by oracle user             ##
## or db administrator who owns this installation.                           ##
##                                                                           ##
###############################################################################

###############################################################################
##                                                                           ##
## Instructions to fill this response file                                   ##
## To register and configure 'Grid Infrastructure for Cluster'               ##
##  - Fill out sections A,B,C,D,E,F and G                                    ##
##  - Fill out section G if OCR and voting disk should be placed on ASM      ##
##                                                                           ##
## To register and configure 'Grid Infrastructure for Standalone server'     ##
##  - Fill out sections A,B and G                                            ##
##                                                                           ##
## To register software for 'Grid Infrastructure'                            ##
##  - Fill out sections A,B and D                                            ##
##  - Provide the cluster nodes in section D when choosing CRS_SWONLY as     ##
##    installation option in section A                                       ##
##                                                                           ##
## To upgrade clusterware and/or Automatic storage management of earlier     ##
## releases                                                                  ##
##  - Fill out sections A,B,C,D and H                                        ##
##                                                                           ##
## To add more nodes to the cluster                                          ##
##  - Fill out sections A and D                                              ##
##  - Provide the cluster nodes in section D when choosing CRS_ADDNODE as    ##
##    installation option in section A                                       ##
##                                                                           ##
###############################################################################

#------------------------------------------------------------------------------
# Do not change the following system generated value. 
#------------------------------------------------------------------------------
oracle.install.responseFileVersion=/oracle/install/rspfmt_crsinstall_response_schema_v12.2.0

###############################################################################
#                                                                             #
#                          SECTION A - BASIC                                  #
#                                                                             #
###############################################################################


#-------------------------------------------------------------------------------
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on  
# Windows based Operating System.
#-------------------------------------------------------------------------------
INVENTORY_LOCATION=/u01/app/oraInventory

#-------------------------------------------------------------------------------
# Specify the installation option.
# Allowed values: CRS_CONFIG or HA_CONFIG or UPGRADE or CRS_SWONLY or HA_SWONLY
#   - CRS_CONFIG  : To register home and configure Grid Infrastructure for cluster
#   - HA_CONFIG   : To register home and configure Grid Infrastructure for stand alone server
#   - UPGRADE     : To register home and upgrade clusterware software of earlier release
#   - CRS_SWONLY  : To register Grid Infrastructure Software home (can be configured for cluster 
#                   or stand alone server later)
#   - HA_SWONLY   : To register Grid Infrastructure Software home (can be configured for stand 
#                   alone server later. This is only supported on Windows.)
#   - CRS_ADDNODE : To add more nodes to the cluster
#-------------------------------------------------------------------------------
oracle.install.option=CRS_CONFIG

#-------------------------------------------------------------------------------
# Specify the complete path of the Oracle Base.
#-------------------------------------------------------------------------------
ORACLE_BASE=/u01/app/oracle

################################################################################
#                                                                              #
#                              SECTION B - GROUPS                              #
#                                                                              #
#   The following three groups need to be assigned for all GI installations.   #
#   OSDBA and OSOPER can be the same or different.  OSASM must be different    #
#   than the other two.                                                        #
#   The value to be specified for OSDBA, OSOPER and OSASM group is only for    #
#   Unix based Operating System.                                               #
#                                                                              #
################################################################################
#-------------------------------------------------------------------------------
# The OSDBA_GROUP is the OS group which is to be granted SYSDBA privileges.
#-------------------------------------------------------------------------------
oracle.install.asm.OSDBA=dba

#-------------------------------------------------------------------------------
# The OSOPER_GROUP is the OS group which is to be granted SYSOPER privileges.
# The value to be specified for OSOPER group is optional.
# Value should not be provided if configuring Client Cluster - i.e. storageOption=CLIENT_ASM_STORAGE.
#-------------------------------------------------------------------------------
oracle.install.asm.OSOPER=

#-------------------------------------------------------------------------------
# The OSASM_GROUP is the OS group which is to be granted SYSASM privileges. This
# must be different than the previous two.
#-------------------------------------------------------------------------------
oracle.install.asm.OSASM=dba

################################################################################
#                                                                              #
#                           SECTION C - SCAN                                   #
#                                                                              #
################################################################################
#-------------------------------------------------------------------------------
# Specify a name for SCAN
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.scanName=ol6-122-scan

#-------------------------------------------------------------------------------
# Specify a unused port number for SCAN service
#-------------------------------------------------------------------------------

oracle.install.crs.config.gpnp.scanPort=1521

################################################################################
#                                                                              #
#                           SECTION D - CLUSTER & GNS                         #
#                                                                              #
################################################################################
#-------------------------------------------------------------------------------
# Specify the required cluster configuration
# Allowed values: STANDALONE, DOMAIN, MEMBERDB, MEMBERAPP
#-------------------------------------------------------------------------------
oracle.install.crs.config.ClusterConfiguration=STANDALONE

#-------------------------------------------------------------------------------
# Specify 'true' if you would like to configure the cluster as Extended, else
# specify 'false'
#
# Applicable only for STANDALONE and DOMAIN cluster configuration
#-------------------------------------------------------------------------------
oracle.install.crs.config.configureAsExtendedCluster=false


#-------------------------------------------------------------------------------
# Specify the Member Cluster Manifest file
#
# Applicable only for MEMBERDB and MEMBERAPP cluster configuration
#-------------------------------------------------------------------------------
oracle.install.crs.config.memberClusterManifestFile=

#-------------------------------------------------------------------------------
# Specify a name for the Cluster you are creating.
#
# The maximum length allowed for clustername is 15 characters. The name can be 
# any combination of lower and uppercase alphabets (A - Z), (0 - 9), hyphen(-)
# and underscore(_).
#
# Applicable only for STANDALONE and DOMAIN cluster configuration
#-------------------------------------------------------------------------------
oracle.install.crs.config.clusterName=ol6-122-cluster

#-------------------------------------------------------------------------------
# Applicable only for STANDALONE, DOMAIN, MEMBERDB cluster configuration.
# Specify 'true' if you would like to configure Grid Naming Service(GNS), else
# specify 'false'
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.configureGNS=false

#-------------------------------------------------------------------------------
# Applicable only for STANDALONE and DOMAIN cluster configuration if you choose to configure GNS.
# Specify 'true' if you would like to assign SCAN name VIP and Node VIPs by DHCP
# , else specify 'false'
#-------------------------------------------------------------------------------
oracle.install.crs.config.autoConfigureClusterNodeVIP=false

#-------------------------------------------------------------------------------
# Applicable only if you choose to configure GNS.
# Specify the type of GNS configuration for cluster
# Allowed values are: CREATE_NEW_GNS and USE_SHARED_GNS
# Only USE_SHARED_GNS value is allowed for MEMBERDB cluster configuration.
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.gnsOption=

#-------------------------------------------------------------------------------
# Applicable only if SHARED_GNS is being configured for cluster
# Specify the path to the GNS client data file
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.gnsClientDataFile=

#-------------------------------------------------------------------------------
# Applicable only for STANDALONE and DOMAIN cluster configuration if you choose to 
# configure GNS for this cluster oracle.install.crs.config.gpnp.gnsOption=CREATE_NEW_GNS
# Specify the GNS subdomain and an unused virtual hostname for GNS service
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.gnsSubDomain=
oracle.install.crs.config.gpnp.gnsVIPAddress=

#-------------------------------------------------------------------------------
# Specify the list of sites - only if configuring an Extended Cluster
#-------------------------------------------------------------------------------
oracle.install.crs.config.sites=

#-------------------------------------------------------------------------------
# Specify the list of nodes that have to be configured to be part of the cluster.
#
# The list should a comma-separated list of tuples.  Each tuple should be a
# colon-separated string that contains
# - 1 field if you have chosen CRS_SWONLY as installation option, or
# - 1 field if configuring an Application Cluster, or
# - 3 fields if configuring a Flex Cluster
# - 3 fields if adding more nodes to the configured cluster, or
# - 4 fields if configuring an Extended Cluster
# 
# The fields should be ordered as follows:
# 1. The first field should be the public node name.
# 2. The second field should be the virtual host name
#    (Should be specified as AUTO if you have chosen 'auto configure for VIP'
#     i.e. autoConfigureClusterNodeVIP=true)
# 3. The third field indicates the role of node (HUB,LEAF). This has to 
#    be provided only if Flex Cluster is being configured.
#    For Extended Cluster only HUB should be specified for all nodes
# 4. The fourth field indicates the site designation for the node. To be specified only if configuring an Extended Cluster.
# The 2nd and 3rd fields are not applicable if you have chosen CRS_SWONLY as installation option
# The 2nd and 3rd fields are not applicable if configuring an Application Cluster
#
# Examples
# For registering GI for a cluster software: oracle.install.crs.config.clusterNodes=node1,node2
# For adding more nodes to the configured cluster: oracle.install.crs.config.clusterNodes=node1:node1-vip:HUB,node2:node2-vip:LEAF
# For configuring Application Cluster: oracle.install.crs.config.clusterNodes=node1,node2
# For configuring Flex Cluster: oracle.install.crs.config.clusterNodes=node1:node1-vip:HUB,node2:node2-vip:LEAF
# For configuring Extended Cluster: oracle.install.crs.config.clusterNodes=node1:node1-vip:HUB:site1,node2:node2-vip:HUB:site2
# You can specify a range of nodes in the tuple using colon separated fields of format
# hostnameprefix:lowerbound-upperbound:hostnamesuffix:vipsuffix:role of node
#
#-------------------------------------------------------------------------------
oracle.install.crs.config.clusterNodes=ol6-122-rac1.localdomain:ol6-122-rac1-vip.localdomain:HUB,ol6-122-rac2.localdomain:ol6-122-rac2-vip.localdomain:HUB

#-------------------------------------------------------------------------------
# The value should be a comma separated strings where each string is as shown below
# InterfaceName:SubnetAddress:InterfaceType
# where InterfaceType can be either "1", "2", "3", "4", or "5"
# InterfaceType stand for the following values
#   - 1 : PUBLIC
#   - 2 : PRIVATE
#   - 3 : DO NOT USE
#   - 4 : ASM
#   - 5 : ASM & PRIVATE
#
# For example: eth0:140.87.24.0:1,eth1:10.2.1.0:2,eth2:140.87.52.0:3
#
#-------------------------------------------------------------------------------
oracle.install.crs.config.networkInterfaceList=eth1:192.168.56.0:1,eth2:192.168.1.0:5,virbr0:192.168.122.0:3

#------------------------------------------------------------------------------
# Create a separate ASM DiskGroup to store GIMR data.
# Specify 'true' if you would like to separate GIMR data with clusterware data, 
# else specify 'false'
# Value should be 'true' for DOMAIN cluster configurations
# Value can be true/false for STANDALONE cluster configurations.
#------------------------------------------------------------------------------
oracle.install.asm.configureGIMRDataDG=false

################################################################################
#                                                                              #
#                              SECTION E - STORAGE                             #
#                                                                              #
################################################################################

#-------------------------------------------------------------------------------
# Specify the type of storage to use for Oracle Cluster Registry(OCR) and Voting
# Disks files
#   - FLEX_ASM_STORAGE
#   - CLIENT_ASM_STORAGE
#
# Applicable only for MEMBERDB cluster configuration
#-------------------------------------------------------------------------------
oracle.install.crs.config.storageOption=                
################################################################################
#                                                                              #
#                               SECTION F - IPMI                               #
#                                                                              #
################################################################################

#-------------------------------------------------------------------------------
# Specify 'true' if you would like to configure Intelligent Power Management interface
# (IPMI), else specify 'false'
#-------------------------------------------------------------------------------
oracle.install.crs.config.useIPMI=false

#-------------------------------------------------------------------------------
# Applicable only if you choose to configure IPMI
# i.e. oracle.install.crs.config.useIPMI=true
# Specify the username and password for using IPMI service
#-------------------------------------------------------------------------------
oracle.install.crs.config.ipmi.bmcUsername=
oracle.install.crs.config.ipmi.bmcPassword=
################################################################################
#                                                                              #
#                                SECTION G - ASM                               #
#                                                                              #
################################################################################

#-------------------------------------------------------------------------------
# ASM Storage Type
# Allowed values are : ASM and ASM_ON_NAS
# ASM_ON_NAS applicable only if
# oracle.install.crs.config.ClusterConfiguration=STANDALONE
#-------------------------------------------------------------------------------
oracle.install.asm.storageOption=ASM

#-------------------------------------------------------------------------------
# NAS location to create ASM disk group for storing OCR/VDSK 
# Specify the NAS location where you want the ASM disk group to be created
# to be used to store OCR/VDSK files
# Applicable only if oracle.install.asm.storageOption=ASM_ON_NAS
#-------------------------------------------------------------------------------
oracle.install.asmOnNAS.ocrLocation=
#------------------------------------------------------------------------------
# Create a separate ASM DiskGroup on NAS to store GIMR data
# Specify 'true' if you would like to separate GIMR data with clusterware data, else
# specify 'false'
# Applicable only if oracle.install.asm.storageOption=ASM_ON_NAS
#------------------------------------------------------------------------------
oracle.install.asmOnNAS.configureGIMRDataDG=false

#-------------------------------------------------------------------------------
# NAS location to create ASM disk group for storing GIMR data
# Specify the NAS location where you want the ASM disk group to be created
# to be used to store the GIMR database
# Applicable only if oracle.install.asm.storageOption=ASM_ON_NAS
# and oracle.install.asmOnNAS.configureGIMRDataDG=true
#-------------------------------------------------------------------------------
oracle.install.asmOnNAS.gimrLocation=

#-------------------------------------------------------------------------------
# Password for SYS user of Oracle ASM
#-------------------------------------------------------------------------------
oracle.install.asm.SYSASMPassword=

#-------------------------------------------------------------------------------
# The ASM DiskGroup
#
# Example: oracle.install.asm.diskGroup.name=data
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.name=DATA

#-------------------------------------------------------------------------------
# Redundancy level to be used by ASM.
# It can be one of the following  
#   - NORMAL
#   - HIGH
#   - EXTERNAL
#   - FLEX#   - EXTENDED (required if oracle.install.crs.config.ClusterConfiguration=EXTENDED)
# Example: oracle.install.asm.diskGroup.redundancy=NORMAL
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.redundancy=EXTERNAL

#-------------------------------------------------------------------------------
# Allocation unit size to be used by ASM.
# It can be one of the following values
#   - 1
#   - 2
#   - 4
#   - 8
#   - 16
# Example: oracle.install.asm.diskGroup.AUSize=4
# size unit is MB
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.AUSize=4

#-------------------------------------------------------------------------------
# Failure Groups for the disk group
# If configuring for Extended cluster specify as list of "failure group name:site"
# tuples.
# Else just specify as list of failure group names
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.FailureGroups=

#-------------------------------------------------------------------------------
# List of disks and their failure groups to create a ASM DiskGroup
# (Use this if each of the disks have an associated failure group)
# Failure Groups are not required if oracle.install.asm.diskGroup.redundancy=EXTERNAL
# Example:
#     For Unix based Operating System:
#     oracle.install.asm.diskGroup.disksWithFailureGroupNames=/oracle/asm/disk1,FGName,/oracle/asm/disk2,FGName
#     For Windows based Operating System:
#     oracle.install.asm.diskGroup.disksWithFailureGroupNames=\\.\ORCLDISKDATA0,FGName,\\.\ORCLDISKDATA1,FGName
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.disksWithFailureGroupNames=/dev/oracleasm/asm-disk3,,/dev/oracleasm/asm-disk2,,/dev/oracleasm/asm-disk4,,/dev/oracleasm/asm-disk1,

#-------------------------------------------------------------------------------
# List of disks to create a ASM DiskGroup
# (Use this variable only if failure groups configuration is not required)
# Example:
#     For Unix based Operating System:
#     oracle.install.asm.diskGroup.disks=/oracle/asm/disk1,/oracle/asm/disk2
#     For Windows based Operating System:
#     oracle.install.asm.diskGroup.disks=\\.\ORCLDISKDATA0,\\.\ORCLDISKDATA1
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.disks=/dev/oracleasm/asm-disk3,/dev/oracleasm/asm-disk2,/dev/oracleasm/asm-disk4,/dev/oracleasm/asm-disk1

#-------------------------------------------------------------------------------
# List of failure groups to be marked as QUORUM.
# Quorum failure groups contain only voting disk data, no user data is stored
# Example:
# oracle.install.asm.diskGroup.quorumFailureGroupNames=FGName1,FGName2
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.quorumFailureGroupNames=
#-------------------------------------------------------------------------------
# The disk discovery string to be used to discover the disks used create a ASM DiskGroup
#
# Example:
#     For Unix based Operating System:
#     oracle.install.asm.diskGroup.diskDiscoveryString=/oracle/asm/*
#     For Windows based Operating System:
#     oracle.install.asm.diskGroup.diskDiscoveryString=\\.\ORCLDISK*
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.diskDiscoveryString=/dev/oracleasm/*

#-------------------------------------------------------------------------------
# Password for ASMSNMP account
# ASMSNMP account is used by Oracle Enterprise Manager to monitor Oracle ASM instances
#-------------------------------------------------------------------------------
oracle.install.asm.monitorPassword=

#-------------------------------------------------------------------------------
# GIMR Storage data ASM DiskGroup
# Applicable only when 
# oracle.install.asm.configureGIMRDataDG=true
# Example: oracle.install.asm.GIMRDG.name=MGMT
#
#-------------------------------------------------------------------------------
oracle.install.asm.gimrDG.name=

#-------------------------------------------------------------------------------
# Redundancy level to be used by ASM.
# It can be one of the following  
#   - NORMAL
#   - HIGH
#   - EXTERNAL
#   - FLEX#   - EXTENDED (only if oracle.install.crs.config.ClusterConfiguration=EXTENDED)
# Example: oracle.install.asm.gimrDG.redundancy=NORMAL
#
#-------------------------------------------------------------------------------
oracle.install.asm.gimrDG.redundancy=

#-------------------------------------------------------------------------------
# Allocation unit size to be used by ASM.
# It can be one of the following values
#   - 1
#   - 2
#   - 4
#   - 8
#   - 16
# Example: oracle.install.asm.gimrDG.AUSize=4
# size unit is MB
#
#-------------------------------------------------------------------------------
oracle.install.asm.gimrDG.AUSize=1

#-------------------------------------------------------------------------------
# Failure Groups for the GIMR storage data ASM disk group
# If configuring for Extended cluster specify as list of "failure group name:site"
# tuples.
# Else just specify as list of failure group names
#-------------------------------------------------------------------------------
oracle.install.asm.gimrDG.FailureGroups=

#-------------------------------------------------------------------------------
# List of disks and their failure groups to create GIMR data ASM DiskGroup
# (Use this if each of the disks have an associated failure group)
# Failure Groups are not required if oracle.install.asm.gimrDG.redundancy=EXTERNAL
# Example:
#     For Unix based Operating System:
#     oracle.install.asm.gimrDG.disksWithFailureGroupNames=/oracle/asm/disk1,FGName,/oracle/asm/disk2,FGName
#     For Windows based Operating System:
#     oracle.install.asm.gimrDG.disksWithFailureGroupNames=\\.\ORCLDISKDATA0,FGName,\\.\ORCLDISKDATA1,FGName
#
#-------------------------------------------------------------------------------
oracle.install.asm.gimrDG.disksWithFailureGroupNames=

#-------------------------------------------------------------------------------
# List of disks to create GIMR data ASM DiskGroup
# (Use this variable only if failure groups configuration is not required)
# Example:
#     For Unix based Operating System:
#     oracle.install.asm.gimrDG.disks=/oracle/asm/disk1,/oracle/asm/disk2
#     For Windows based Operating System:
#     oracle.install.asm.gimrDG.disks=\\.\ORCLDISKDATA0,\\.\ORCLDISKDATA1
#
#-------------------------------------------------------------------------------
oracle.install.asm.gimrDG.disks=

#-------------------------------------------------------------------------------
# List of failure groups to be marked as QUORUM.
# Quorum failure groups contain only voting disk data, no user data is stored
# Example:
# oracle.install.asm.gimrDG.quorumFailureGroupNames=FGName1,FGName2
#-------------------------------------------------------------------------------
oracle.install.asm.gimrDG.quorumFailureGroupNames=

#-------------------------------------------------------------------------------
# Configure AFD - ASM Filter Driver
# Applicable only for FLEX_ASM_STORAGE option
# Specify 'true' if you want to configure AFD, else specify 'false'
#-------------------------------------------------------------------------------
oracle.install.asm.configureAFD=false
#-------------------------------------------------------------------------------
# Configure RHPS - Rapid Home Provisioning Service
# Applicable only for DOMAIN cluster configuration
# Specify 'true' if you want to configure RHP service, else specify 'false'
#-------------------------------------------------------------------------------
oracle.install.crs.configureRHPS=false

################################################################################
#                                                                              #
#                             SECTION H - UPGRADE                              #
#                                                                              #
################################################################################
#-------------------------------------------------------------------------------
# Specify whether to ignore down nodes during upgrade operation.
# Value should be 'true' to ignore down nodes otherwise specify 'false'
#-------------------------------------------------------------------------------
oracle.install.crs.config.ignoreDownNodes=false                
################################################################################
#                                                                              #
#                               MANAGEMENT OPTIONS                             #
#                                                                              #
################################################################################

#-------------------------------------------------------------------------------
# Specify the management option to use for managing Oracle Grid Infrastructure
# Options are:
# 1. CLOUD_CONTROL - If you want to manage your Oracle Grid Infrastructure with Enterprise Manager Cloud Control.
# 2. NONE   -If you do not want to manage your Oracle Grid Infrastructure with Enterprise Manager Cloud Control.
#-------------------------------------------------------------------------------
oracle.install.config.managementOption=NONE

#-------------------------------------------------------------------------------
# Specify the OMS host to connect to Cloud Control.
# Applicable only when oracle.install.config.managementOption=CLOUD_CONTROL
#-------------------------------------------------------------------------------
oracle.install.config.omsHost=

#-------------------------------------------------------------------------------
# Specify the OMS port to connect to Cloud Control.
# Applicable only when oracle.install.config.managementOption=CLOUD_CONTROL
#-------------------------------------------------------------------------------
oracle.install.config.omsPort=0

#-------------------------------------------------------------------------------
# Specify the EM Admin user name to use to connect to Cloud Control.
# Applicable only when oracle.install.config.managementOption=CLOUD_CONTROL
#-------------------------------------------------------------------------------
oracle.install.config.emAdminUser=

#-------------------------------------------------------------------------------
# Specify the EM Admin password to use to connect to Cloud Control.
# Applicable only when oracle.install.config.managementOption=CLOUD_CONTROL
#-------------------------------------------------------------------------------
oracle.install.config.emAdminPassword=
################################################################################
#                                                                              #
#                      Root script execution configuration                     #
#                                                                              #
################################################################################

#-------------------------------------------------------------------------------------------------------
# Specify the root script execution mode.
#
#   - true  : To execute the root script automatically by using the appropriate configuration methods.
#   - false : To execute the root script manually.
#
# If this option is selected, password should be specified on the console.
#-------------------------------------------------------------------------------------------------------
oracle.install.crs.rootconfig.executeRootScript=false

#--------------------------------------------------------------------------------------
# Specify the configuration method to be used for automatic root script execution.
#
# Following are the possible choices:
#   - ROOT
#   - SUDO
#--------------------------------------------------------------------------------------
oracle.install.crs.rootconfig.configMethod=
#--------------------------------------------------------------------------------------
# Specify the absolute path of the sudo program.
#
# Applicable only when SUDO configuration method was chosen.
#--------------------------------------------------------------------------------------
oracle.install.crs.rootconfig.sudoPath=

#--------------------------------------------------------------------------------------
# Specify the name of the user who is in the sudoers list. 
#
# Applicable only when SUDO configuration method was chosen.
#--------------------------------------------------------------------------------------
oracle.install.crs.rootconfig.sudoUserName=
#--------------------------------------------------------------------------------------
# Specify the nodes batch map.
#
# This should be a comma separated list of node:batch pairs.
# During upgrade, you can sequence the automatic execution of root scripts
# by pooling the nodes into batches. 
# A maximum of three batches can be specified. 
# Installer will execute the root scripts on all the nodes in one batch before
# proceeding to next batch.
# Root script execution on the local node must be in Batch 1.
# Only one type of node role can be used for each batch.
# Root script execution should be done first in all HUB nodes and then, when
# existent, in all the LEAF nodes.
#
# Examples:
# 1. oracle.install.crs.config.batchinfo=HUBNode1:1,HUBNode2:2,HUBNode3:2,LEAFNode4:3
# 2. oracle.install.crs.config.batchinfo=HUBNode1:1,LEAFNode2:2,LEAFNode3:2,LEAFNode4:2
# 3. oracle.install.crs.config.batchinfo=HUBNode1:1,HUBNode2:1,LEAFNode3:2,LEAFNode4:3
#
# Applicable only for UPGRADE install option. 
#--------------------------------------------------------------------------------------
oracle.install.crs.config.batchinfo=
################################################################################
#                                                                              #
#                           APPLICATION CLUSTER OPTIONS                        #
#                                                                              #
################################################################################

#-------------------------------------------------------------------------------
# Specify the Virtual hostname to configure virtual access for your Application
# The value to be specified for Virtual hostname is optional.
#-------------------------------------------------------------------------------
oracle.install.crs.app.applicationAddress=

Comments

Popular posts from this blog

How to Get Table Size, Database Size, Indexes Size, schema Size, Tablespace Size, column Size in PostgreSQL Database

PostgreSQL Pgbadger Installation On Linux

PostgreSQL pgBadger

How to configure Replication Manager (repmgr) ?

How To Schedule PostgreSQL Jobs using pgAgent on Linux plateform