Drop Down MenusCSS Drop Down MenuPure CSS Dropdown Menu

aireplay-ng

- 
aireplay-ng -V (return code: 1)

aireplay-ng: unrecognized option '--version'
"aireplay-ng --help" for help.

aireplay-ng -HELP (return code: 1)


  Aireplay-ng 1.2 rc4 - (C) 2006-2015 Thomas d'Otreppe
  http://www.aircrack-ng.org

  usage: aireplay-ng <options> <replay interface>

  Filter options:

      -b bssid  : MAC address, Access Point
      -d dmac   : MAC address, Destination
      -s smac   : MAC address, Source
      -m len    : minimum packet length
      -n len    : maximum packet length
      -u type   : frame control, type    field
      -v subt   : frame control, subtype field
      -t tods   : frame control, To      DS bit
      -f fromds : frame control, From    DS bit
      -w iswep  : frame control, WEP     bit
      -D        : disable AP detection

  Replay options:

      -x nbpps  : number of packets per second
      -p fctrl  : set frame control word (hex)
      -a bssid  : set Access Point MAC address
      -c dmac   : set Destination  MAC address
      -h smac   : set Source       MAC address
      -g value  : change ring buffer size (default: 8)
      -F        : choose first matching packet

      Fakeauth attack options:

      -e essid  : set target AP SSID
      -o npckts : number of packets per burst (0=auto, default: 1)
      -q sec    : seconds between keep-alives
      -Q        : send reassociation requests
      -y prga   : keystream for shared key auth
      -T n      : exit after retry fake auth request n time

      Arp Replay attack options:

      -j        : inject FromDS packets

      Fragmentation attack options:

      -k IP     : set destination IP in fragments
      -l IP     : set source IP in fragments

      Test attack options:

      -B        : activates the bitrate test

  Source options:

      -i iface  : capture packets from this interface
      -r file   : extract packets from this pcap file

  Miscellaneous options:

      -R                    : disable /dev/rtc usage
      --ignore-negative-one : if the interface's channel can't be determined,
                              ignore the mismatch, needed for unpatched cfg80211

  Attack modes (numbers can still be used):

      --deauth      count : deauthenticate 1 or all stations (-0)
      --fakeauth    delay : fake authentication with AP (-1)
      --interactive       : interactive frame selection (-2)
      --arpreplay         : standard ARP-request replay (-3)
      --chopchop          : decrypt/chopchop WEP packet (-4)
      --fragment          : generates valid keystream   (-5)
      --caffe-latte       : query a client for new IVs  (-6)
      --cfrag             : fragments against a client  (-7)
      --migmode           : attacks WPA migration mode  (-8)
      --test              : tests injection and quality (-9)

      --help              : Displays this usage screen

Comments

Post a Comment

Popular posts from this blog

How to Get Table Size, Database Size, Indexes Size, schema Size, Tablespace Size, column Size in PostgreSQL Database

-
In this post, I am sharing few important function for finding the size of database, table and index in PostgreSQL. Finding object size in postgresql database is very important and common. Is it very useful to know the exact size occupied by the object at the tablespace. The object size in the following scripts is in GB. The scripts have been formatted to work very easily with PUTTY SQL Editor. 1. Checking table size excluding table dependency: SELECT pg_size_pretty(pg_relation_size('mhrordhu_shk.mut_kharedi_audit')); pg_size_pretty ---------------- 238 MB (1 row) 2. Checking table size including table dependency: SELECT pg_size_pretty(pg_total_relation_size('mhrordhu_shk.mut_kharedi_audit')); pg_size_pretty ---------------- 268 MB (1 row) 3. Finding individual postgresql database size SELECT pg_size_pretty(pg_database_size('db_name')); 4. Finding individual table size for postgresql database -including dependency index: SELECT pg_size_pretty(pg_total_rel
Read more

PostgreSQL Pgbadger Installation On Linux

-
Image
PgBadger is a tool that analyzes PostgreSQL log files and generates reports on execution of SQL and server operation. Statistical reports analyzed from a number of perspectives can be useful not only for grasping the usual database operation but also as a hint for performance improvement. The report output by pgBadger has the following features. Graph output in HTML format Many statistical objects Daily, Weekly unit creation possible 1.Graph output in HTML format Many of the analysis results can be displayed in graph form by outputting the report in HTML format (output in text format or JSON format is also possible). By analyzing the log information graphed, it is much more prospective for people to see than the raw log data. So, if you do not need to handle it with another tool separately, we recommend report output in HTML format. 2.Many statistical objects A lot of data useful for database performance analysis is output in the report as shown below. Qu
Read more

How to find the server is whether standby (slave) or primary(master) in Postgresql replication ?

-
Method 1 You can check the mode of the server using "pg_controldata". [pgsql@test~]$ pg_controldata /usr/local/pgsql/data84/ Database cluster state: in archive recovery --> This is Standby Database Database cluster state: in production --> This is Production Database [Master] Method 2 You can use pg_is_in_recovery() which returns True if recovery is still in progress(so the server is running in standby mode or slave) postgres=# select pg_is_in_recovery(); pg_is_in_recovery ------------------- t (1 row) If Return    false   so the server is running in primary mode or master postgres=# select pg_is_in_recovery(); pg_is_in_recovery ------------------- f (1 row)
Read more

7 Steps to configure BDR replication in postgresql

-
Image
 The  BDR  (Bi-Directional Replication) project adds multi-master replication to PostgreSQL 9.4.  Postgres-BDR has a lower impact on the masters(s) than trigger-based replication solutions. There is no write-amplification, as it does not require triggers to write to queue tables in order to replicate writes.   Here We are using  postgres version 9.4.12 and bdr version 1.0.2. for configuring  multi master replication . Simply Following 7 steps you can configure the multi master replication in postgresql. To download the bdr in below link. .   https://github.com/2ndQuadrant/bdr/archive/bdr-pg/REL9_4_12-1.tar.gz $ tar -xzvf REL9_4_12-1.tar.gz $ wget https://github.com/2ndQuadrant/bdr/archive/bdr-plugin/1.0.2.tar.gz $ tar -xzvf 1.0.2.tar.gz 1. To install BDR. $ cd ~/bdr-bdr-pg-REL9_4_12-1 $ ./configure --prefix=/usr/lib/postgresql/9.4 --enable-debug --with-openssl $ make -j4 -s install-world $ cd ~/bdr-bdr-plugin-1.0.2 $ PATH=/usr/lib/postgresql/9.4/bin:"$PATH" ./c
Read more

How To Schedule PostgreSQL Jobs using pgAgent on Linux plateform

-
Image
Taking regular SQL database backup is one of the most important responsibilities of a database administrator. By setting up automatic database backup we can get rid of the additional overhead of doing it manually, every day, week or month. When it comes to PostgreSQL running in any Unix distributions or in Windows, there are at least two ways to do it. Using the built in CronJobs/ CronTabs in case of  Linux, and Windows scheduled tasks in Windows . Using PostgreSQL’s own scheduling agent,  pgAgent . Often DBAs tends to rely on CronTabs or Scheduled tasked because of the ease of use it offers. But there are several advantages if you use pgAgent instead. Though it takes a little effort to install pgAgent, it is much better than Cron jobs or Scheduled tasks. Why use pgAgent over CronJob: Compared to CronTab, PgAgent has the following advantages:  You can have multiple steps for a job without having to resort to a batch script. You can have multiple schedules for a job
Read more