Oracle 11gr2 cluster verification utility output

bin@]./cluvfy stage -post crsinst -n db-node1,db-node2 -verbose

Performing post-checks for cluster services setup

Checking node reachability…

Check: Node reachability from node “db-node1”
Destination Node Reachable? 
———————————— ————————
db-node1 yes 
db-node2 yes 
Result: Node reachability check passed from node “db-node1”

Checking user equivalence…

Check: User equivalence for user “grid”
Node Name Status 
———————————— ————————
db-node2 passed 
db-node1 passed 
Result: User equivalence check passed for user “grid”

Checking node connectivity…

Checking hosts config file…
Node Name Status 
———————————— ————————
db-node2 passed 
db-node1 passed

Verification of the hosts config file successful

Interface information for node “db-node2”
Name IP Address Subnet Gateway Def. Gateway HW Address MTU 
—— ————— ————— ————— ————— —————– ——
eth2 192.168.0.1 192.168.0.0 0.0.0.0 192.168.0.241 00:21:5E:5D:BA:84 1500 
eth3 10.10.10.37 10.10.10.0 0.0.0.0 192.168.0.241 00:21:5E:5D:BA:86 1500 
usb0 169.254.95.120 169.254.95.0 0.0.0.0 192.168.0.241 02:21:5E:5E:BA:87 1500

Interface information for node “db-node1”
Name IP Address Subnet Gateway Def. Gateway HW Address MTU 
—— ————— ————— ————— ————— —————– ——
eth2 192.168.0.2 192.168.0.0 0.0.0.0 192.168.0.241 00:21:5E:5D:B6:80 1500 
eth2 192.168.0.251 192.168.0.0 0.0.0.0 192.168.0.241 00:21:5E:5D:B6:80 1500 
eth2 192.168.0.252 192.168.0.0 0.0.0.0 192.168.0.241 00:21:5E:5D:B6:80 1500 
eth2 192.168.0.250 192.168.0.0 0.0.0.0 192.168.0.241 00:21:5E:5D:B6:80 1500 
eth2 192.168.0.47 192.168.0.0 0.0.0.0 192.168.0.241 00:21:5E:5D:B6:80 1500 
eth2 192.168.0.64 192.168.0.0 0.0.0.0 192.168.0.241 00:21:5E:5D:B6:80 1500 
eth3 10.10.10.63 10.10.10.0 0.0.0.0 192.168.0.241 00:21:5E:5D:B6:82 1500 
eth3 169.254.158.16 169.254.0.0 0.0.0.0 192.168.0.241 00:21:5E:5D:B6:82 1500 
usb0 169.254.95.120 169.254.95.0 UNKNOWN 192.168.0.241 02:21:5E:5E:B6:83 1500

Check: Node connectivity for interface “eth2”
Source Destination Connected? 
—————————— —————————— —————-
db-node2[192.168.0.1] db-node1[192.168.0.2] yes 
db-node2[192.168.0.1] db-node1[192.168.0.251] yes 
db-node2[192.168.0.1] db-node1[192.168.0.252] yes 
db-node2[192.168.0.1] db-node1[192.168.0.250] yes 
db-node2[192.168.0.1] db-node1[192.168.0.47] yes 
db-node2[192.168.0.1] db-node1[192.168.0.64] yes 
db-node1[192.168.0.2] db-node1[192.168.0.251] yes 
db-node1[192.168.0.2] db-node1[192.168.0.252] yes 
db-node1[192.168.0.2] db-node1[192.168.0.250] yes 
db-node1[192.168.0.2] db-node1[192.168.0.47] yes 
db-node1[192.168.0.2] db-node1[192.168.0.64] yes 
db-node1[192.168.0.251] db-node1[192.168.0.252] yes 
db-node1[192.168.0.251] db-node1[192.168.0.250] yes 
db-node1[192.168.0.251] db-node1[192.168.0.47] yes 
db-node1[192.168.0.251] db-node1[192.168.0.64] yes 
db-node1[192.168.0.252] db-node1[192.168.0.250] yes 
db-node1[192.168.0.252] db-node1[192.168.0.47] yes 
db-node1[192.168.0.252] db-node1[192.168.0.64] yes 
db-node1[192.168.0.250] db-node1[192.168.0.47] yes 
db-node1[192.168.0.250] db-node1[192.168.0.64] yes 
db-node1[192.168.0.47] db-node1[192.168.0.64] yes 
Result: Node connectivity passed for interface “eth2”

Check: TCP connectivity of subnet “192.168.0.0”
Source Destination Connected? 
—————————— —————————— —————-
db-node1:192.168.0.2 db-node2:192.168.0.1 passed 
db-node1:192.168.0.2 db-node1:192.168.0.251 passed 
db-node1:192.168.0.2 db-node1:192.168.0.252 passed 
db-node1:192.168.0.2 db-node1:192.168.0.250 passed 
db-node1:192.168.0.2 db-node1:192.168.0.47 passed 
db-node1:192.168.0.2 db-node1:192.168.0.64 passed 
Result: TCP connectivity check passed for subnet “192.168.0.0”

Check: Node connectivity for interface “eth3”
Source Destination Connected? 
—————————— —————————— —————-
db-node2[10.10.10.37] db-node1[10.10.10.63] yes 
Result: Node connectivity passed for interface “eth3”

Check: TCP connectivity of subnet “10.10.10.0”
Source Destination Connected? 
—————————— —————————— —————-
db-node1:10.10.10.63 db-node2:10.10.10.37 passed 
Result: TCP connectivity check passed for subnet “10.10.10.0”

Checking subnet mask consistency…
Subnet mask consistency check passed for subnet “192.168.0.0”.
Subnet mask consistency check passed for subnet “10.10.10.0”.
Subnet mask consistency check passed.

Result: Node connectivity check passed

Checking multicast communication…

Checking subnet “192.168.0.0” for multicast communication with multicast group “230.0.1.0”…
Check of subnet “192.168.0.0” for multicast communication with multicast group “230.0.1.0” passed.

Checking subnet “10.10.10.0” for multicast communication with multicast group “230.0.1.0”…
Check of subnet “10.10.10.0” for multicast communication with multicast group “230.0.1.0” passed.

Check of multicast communication passed.
Check: Time zone consistency 
Result: Time zone consistency check passed

Checking Oracle Cluster Voting Disk configuration…

ERROR:

PRVF-4193 : Asm is not running on the following nodes. Proceeding with the remaining nodes.
db-node2

Oracle Cluster Voting Disk configuration check passed

Checking Cluster manager integrity…

Checking CSS daemon…

Node Name Status 
———————————— ————————
db-node2 not running 
db-node1 running

ERROR: 
PRVF-5319 : Oracle Cluster Synchronization Services do not appear to be online.

Cluster manager integrity check failed

UDev attributes check for OCR locations started…
Result: UDev attributes check passed for OCR locations

UDev attributes check for Voting Disk locations started…
Result: UDev attributes check passed for Voting Disk locations

Check default user file creation mask
Node Name Available Required Comment 
———— ———————— ———————— ———-
db-node2 0022 0022 passed 
db-node1 0022 0022 passed 
Result: Default user file creation mask check passed

Checking cluster integrity…

Node Name 
————————————
db-node1 
db-node2

Cluster integrity check failed This check did not run on the following node(s): 
db-node2

Checking OCR integrity…

Checking the absence of a non-clustered configuration…
All nodes free of non-clustered, local-only configurations

ERROR:

PRVF-4193 : Asm is not running on the following nodes. Proceeding with the remaining nodes.

db-node2

Checking OCR config file “/etc/oracle/ocr.loc”…

OCR config file “/etc/oracle/ocr.loc” check successful

ERROR:

PRVF-4195 : Disk group for ocr location “+VOTING_GRP” not available on the following nodes:

db-node2

NOTE: 
This check does not verify the integrity of the OCR contents. Execute ‘ocrcheck’ as a privileged user to verify the contents of OCR.

OCR integrity check failed

Checking CRS integrity…

Clusterware version consistency passed

ERROR: 
PRVF-5305 : The Oracle Clusterware is not healthy on node “db-node2”
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager

The Oracle Clusterware is healthy on node “db-node1”

CRS integrity check failed

Checking node application existence…

Checking existence of VIP node application (required)
Node Name Required Running? Comment 
———— ———————— ———————— ———-
db-node2 yes no exists 
db-node1 yes yes passed 
VIP node application is offline on nodes “db-node2”

Checking existence of NETWORK node application (required)
Node Name Required Running? Comment 
———— ———————— ———————— ———-
db-node2 yes no failed 
db-node1 yes yes passed 
PRVF-4570 : Failed to check existence of NETWORK node application on nodes “db-node2”

Checking existence of GSD node application (optional)
Node Name Required Running? Comment 
———— ———————— ———————— ———-
db-node2 no no exists 
db-node1 no no exists 
GSD node application is offline on nodes “db-node2,db-node1”

Checking existence of ONS node application (optional)
Node Name Required Running? Comment 
———— ———————— ———————— ———-
db-node2 no no failed 
db-node1 no yes passed 
PRVF-4576 : Failed to check existence of ONS node application on nodes “db-node2”

Checking Single Client Access Name (SCAN)…
SCAN Name Node Running? ListenerName Port Running? 
—————- ———— ———— ———— ———— ————
exora-scan.dom.com db-node1 true LISTENER_SCAN1 1521 true 
exora-scan.dom.com db-node1 true LISTENER_SCAN2 1521 true 
exora-scan.dom.com db-node1 true LISTENER_SCAN3 1521 true

Checking TCP connectivity to SCAN Listeners…
Node ListenerName TCP connectivity? 
———— ———————— ————————
db-node1 LISTENER_SCAN1 yes 
db-node1 LISTENER_SCAN2 yes 
db-node1 LISTENER_SCAN3 yes 
TCP connectivity to SCAN Listeners exists on all cluster nodes

Checking name resolution setup for “exora-scan.dom.com”…
SCAN Name IP Address Status Comment 
———— ———————— ———————— ———-
exora-scan.dom.com 192.168.0.250 passed 
exora-scan.dom.com 192.168.0.251 passed 
exora-scan.dom.com 192.168.0.252 passed

Verification of SCAN VIP and Listener setup passed

Checking OLR integrity…

Checking OLR config file…

OLR config file check successful

Checking OLR file attributes…

OLR file check successful

WARNING: 
This check does not verify the integrity of the OLR contents. Execute ‘ocrcheck -local’ as a privileged user to verify the contents of OLR.

OLR integrity check passed
OCR detected on ASM. Running ACFS Integrity checks…

Starting check to see if ASM is running on all cluster nodes…

PRVF-5110 : ASM is not running on nodes: “db-node2,”

Starting Disk Groups check to see if at least one Disk Group configured…
Disk Group Check passed. At least one Disk Group configured

Task ACFS Integrity check failed

Checking to make sure user “grid” is not in “root” group
Node Name Status Comment 
———— ———————— ————————
db-node2 passed does not exist 
db-node1 passed does not exist 
Result: User “grid” is not part of “root” group. Check passed

Checking if Clusterware is installed on all nodes…
Check of Clusterware install passed

Checking if CTSS Resource is running on all nodes…
Check: CTSS Resource running on all nodes
Node Name Status 
———————————— ————————
db-node2 failed 
PRVF-9671 : CTSS on node “db-node2” is not in ONLINE state, when checked with command “/u11/app/11.2.0/grid2/bin/crsctl stat resource ora.ctssd -init” 
db-node1 passed 
Result: Check of CTSS resource passed on all nodes

Querying CTSS for time offset on all nodes…
Result: Query of CTSS for time offset passed

Check CTSS state started…
Check: CTSS state
Node Name State 
———————————— ————————
db-node1 Observer 
CTSS is in Observer state. Switching over to clock synchronization checks using NTP

Starting Clock synchronization checks using Network Time Protocol(NTP)…

NTP Configuration file check started…
The NTP configuration file “/etc/ntp.conf” is available on all nodes
NTP Configuration file check passed

Checking daemon liveness…

Check: Liveness for “ntpd”
Node Name Running? 
———————————— ————————
db-node1 no 
Result: Liveness check failed for “ntpd”
PRVF-5494 : The NTP Daemon or Service was not alive on all nodes
PRVF-5415 : Check to see if NTP daemon or service is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed

PRVF-9652 : Cluster Time Synchronization Services check failed
Checking VIP configuration.
Checking VIP Subnet configuration.
Check for VIP Subnet configuration passed.
Checking VIP reachability
Check for VIP reachability passed.

Post-check for cluster services setup was unsuccessful on all the nodes. 
]0;grid@db-node1:/u11/app/11.2.0/grid2/bin[grid@db-node1 bin]$

 

For oracle 10g cluster verification utility is

[oracle@rac-node1 cluvfy]$ ./runcluvfy.sh stage -post hwos -n rac-node1,rac-node2 -verbose

Performing post-checks for hardware and operating system setup

Checking node reachability…

Check: Node reachability from node “rac-node1”
Destination Node Reachable?
———————————— ————————
rac-node1 yes
rac-node2 yes
Result: Node reachability check passed from node “rac-node1”.

Checking user equivalence…

Check: User equivalence for user “oracle”
Node Name Comment
———————————— ————————
rac-node2 passed
rac-node1 passed
Result: User equivalence check passed for user “oracle”.

Checking node connectivity…

Interface information for node “rac-node2”
Interface Name IP Address Subnet
—————————— —————————— —————-
eth0 10.68.226.200 10.68.226.0
eth1 192.168.1.2 192.168.1.0

Interface information for node “rac-node1”
Interface Name IP Address Subnet
—————————— —————————— —————-
eth0 10.68.226.199 10.68.226.0
eth1 192.168.1.1 192.168.1.0

Check: Node connectivity of subnet “10.68.226.0”
Source Destination Connected?
—————————— —————————— —————-
rac-node2:eth0 rac-node1:eth0 yes
Result: Node connectivity check passed for subnet “10.68.226.0” with node(s) rac-node2,rac-node1.

Check: Node connectivity of subnet “192.168.1.0”
Source Destination Connected?
—————————— —————————— —————-
rac-node2:eth1 rac-node1:eth1 yes
Result: Node connectivity check passed for subnet “192.168.1.0” with node(s) rac-node2,rac-node1.

Suitable interfaces for the private interconnect on subnet “10.68.226.0”:
rac-node2 eth0:10.68.226.200
rac-node1 eth0:10.68.226.199

Suitable interfaces for the private interconnect on subnet “192.168.1.0”:
rac-node2 eth1:192.168.1.2
rac-node1 eth1:192.168.1.1

ERROR:
Could not find a suitable set of interfaces for VIPs.

Result: Node connectivity check failed.

Checking shared storage accessibility…

WARNING:
Package cvuqdisk not installed.
rac-node2,rac-node1

Shared storage check failed on nodes “rac-node2,rac-node1”.

Post-check for hardware and operating system setup was unsuccessful on all the nodes.
[oracle@rac-node1 cluvfy]$